SINGER SEWING 29K 81869 82008 82052 HUB,SHAFT,GEAR ASSEMBLY ADLER 30

Description

THESE ASSEMBLIES ARE NOW BEING MANUFACTURED IN BELGIUM.   MY SUPPLIER IN GERMANY HAS CEASED PRODUCTION.   USUALLY I HAVE 5 OF THESE IN STOCK, BUT OCCASIONALLY THOSE 5 WILL SELL PRIOR TO THE NEXT SHIPMENT ARRIVING.  IF THAT'S THE CASE, PLEASE ALLOW 10 TO 15 DAYS SHIPPING TIME.
A NEW HUB/SHAFT/GEAR ASSEMBLY FOR ALL SINGER 29K, 29U, 29K171 SEWING MACHINES.  THIS ALLOWS THE OPERATOR TO MOVE THE HAND WHEEL TO THE FRONT OF THE MACHINE FACING YOU.  SIMPLY REMOVE THE 3  BOLTS FROM THE EXISTING COVER PLATE, INSERT THE ASSEMBLY AND RE-INSTALL THE BOLTS.  THE SHAPE OF THE REAR OF THE HUB PROVIDES PERFECT GEAR ALIGNMENT WHEN YOU INSTALL THE ASSEMBLY.....NO NEED TO TURN AND TWIST TRYING TO ALIGN.   INSTALLS IN ABOUT 1 MINUTE USING A STRAIGHT SCREWDRIVER.
THE FIRST PHOTO IS OF A RESTORED 29K51
....
THE MACHINE IS NOT INCLUDED IN THE SALE
.  THE PHOTO IS SHOWN TO DEMONSTRATE WHERE YOUR HAND WHEEL WILL BE ONCE MOVED ONTO THE NEW HUB.  YOU CAN ALSO MOVE THE BOBBIN WINDER TO THE NOTCH ON THE FRONT OF THE MACHINE IN ORDER TO CONTINUE USING IT WITH YOUR RELOCATED HAND WHEEL.  YOUR MACHINE MUST HAVE THE NOTCH LOCATED IN THE FRONT AS SHOWN IN THE LAST  PHOTO.  THIS ASSEMBLY WILL FIT ALL 29K  AND OTHER MACHINES, WHETHER SHORT OR LONG ARM THAT  HAVE THE ROUND PORT IN THE FRONT OF THE MACHINE WITH 3 BOLT HOLES .   IT WILL NOT FIT  THE 29-4 SERIES OR OTHER OLDER SERIES THAT DO NOT HAVE THE INTERNAL GEAR MOUNTED ON THE TOP SHAFT ORIGINALLY AND A COVER PLATE WITH TWO BOLT HOLES.
NOTE:  SHIPPING IS  BASED UPON BUYER'S  LOCATION.